Manual Plug In Powder Diverter Valve 1 Inch Plug Diverter Valve For High Temperatures

Highlights

•  Pressure shock resistant up to 10 bar*   
• Two channel design   
• Minimal maintenance 
• Quick clean version available
• Compact form 
• User friendly design
•  No moving parts on the outside   
• Pressure up to 3 bar g with static seals   
• Sizes 50-150 up to 6 bar g with inflfl atable seals   
• Versions with electrical drive available 
• Wear resistant pipes are optionally available 

Product information                 

The plug type diverter consists of an aluminium housing and end covers in which a plug with two pipes is installed.  All product contact surfaces are made from stainless steel AISI 316 / DIN 1.4404. Three  FDA approved silicone seals guarantee the sealing between housing and plug. The body is pressure tight, so ensuring no leakage to atmosphere. The standard diverter can be used in systems with positive pressures up to 3 bar g (static seals). The sizes 50-150 are optionally available for pressures up to 6 bar g (infl atable seals). The PTD is supplied with a complete electro pneumatic control system, including solenoids and inductive position sensors.The standard diverter can be used for product temperatures ranging from –25 °C up to +80 °C at ambient temperatures of –10 °C up  to +40 °C. Versions for higher temperatures are available on request

 Plug Type Diverter 

The  Dobritz plug type diverters have been specially  designed to route powders and pellets with minimum degradation in  pneumatic conveying systems. The PTD plug type diverter is applied in  the chemical, pharmaceutical, plastic, food and other related industries.  A smooth passage of products is guaranteed by precision machining,  a good sealing and a complete obstruction free passage.  The user friendly fool proof design enables fast in situ internal  examination, cleaning and, if necessary, replacement of seals.  The PTD design conforms to all current legislation regarding safety in the  workplace. Consequently there are no moving parts on the outside.  The PTD is available in 7 diff erent pipe sizes: ∅ 50, 65, 80, 100, 125, 150  and 200 mm.

Plug In Powder Diverter Valve

Manual Powder Diverter Valve

1 Inch Plug Diverter Valve

Manual Plug In Powder Diverter Valve 1 Inch Plug Diverter Valve For High Temperatures Images